Biomedical Engineer

Full Job Description

This Biomedical Engineer position works within the Healthcare Technology Management (HTM) department at the Washington DC VA Medical Center.

The HTM program includes, but is not limited to: consultation with clinical and technical staff regarding medical equipment needs and requirements, medical technology assessment, strategic planning, acquisition support, program and project management, networked medical device protection, ongoing maintenance support and quality assurance.

Applicants pending the completion of educational or certification/licensure requirements may be referred and tentatively selected but may not be hired until all requirements are met.

Basic Requirements: Citizenship. Be a citizen of the United States.

(Non-citizens may be appointed when it is not possible to recruit qualified citizens in accordance with [VA Handbook 5005, Part II,] chapter 3, section A, paragraph 3.g.) English Language Proficiency.

Biomedical Engineers must be proficient in spoken and written English in accordance with chapter 2, section D, paragraph 5a, this part. Education and/or Experience.

The individual must meet either item (1) or (2) below to meet this requirement: Bachelor's Degree or Higher in Engineering.

To be creditable, the curriculum must be from a school of engineering with at least one curriculum accredited by the Accreditation Board for Engineering and Technology (ABET), as a professional engineering curriculum.

Examples of acceptable engineering degrees include: Biomedical Engineering, Clinical Engineering, Bioengineering, Biomechanical Engineering, Electrical Engineering, Mechanical Engineering, and Biochemical Engineering.

Titles may vary from educational institutions and change over time. OR Certification as a Certified Clinical Engineer (CCE) and a bachelor's degree not listed in item 3.b.(1) above.

Grade Determinations: Biomedical Engineer, GS-7 (Entry Level) Experience. None beyond the basic requirements. Education.

Bachelor's degree as outlined in paragraph 3.b.(1), above, or CCE certification with at least a bachelor's degree not listed in paragraph 3.b.(1). Demonstrated Knowledge, Skills, and Abilities.

None beyond the basic requirements. Assignment. Employees serve in an entry level biomedical engineer career development position.

It is expected that biomedical engineers at the entry level receive ongoing guidance from more experienced staff members and perform assignments under close supervision.

Biomedical Engineer, GS-9 (Developmental Level 1) Experience. At least one year of specialized experience equivalent to the next lower level.

(Example of GS-07 Experience: Employees serve in an entry level biomedical engineer career development position.) OR Education Master's degree in Biomedical Engineering, or a related field of study, as outlined in paragraph 3.b.(1).OR Bachelor's degree, as outlined in paragraph 3.b.(1), plus two full years of progressively higher level graduate education in a related field of study, that demonstrates the KSAs for the GS-9 level assignment.

Knowledge, Skills, and Abilities (KSAs).

In addition to the experience for the GS-09, the following KSAs are required: Knowledge of the principles, theories, concepts, and practices of the Biomedical Engineering profession.

Ability to interpret relevant codes, regulations, guidelines, and standards, and make recommendations to ensure compliance with medical center programs.

Ability to understand the operational needs of clinical services in the health care system.

Ability to prepare material on current technical topics and trends, for presentation to other technical staff and mid-level hospital management, and the ability to keep abreast of changes in technology.

Assignment. Biomedical Engineers, at this developmental level, require direction on more complex tasks.

Employees complete technical assignments in the engineering field, under the direction of a senior biomedical engineer and will be required to rotate through, and participate in, the operations of other hospital services.

At the GS-9 grade level, employees function with oversight by a supervisor for more complex assignments. Biomedical Engineer, GS-11 (Developmental Level 2) Experience.

At least [one] year of experience equivalent to the next lower level, [and must fully meet the KSAs at that level.] (Example of GS-09 Experience: At the GS-9 grade level, employees function with oversight by a supervisor for more complex assignments.) OR Education Ph.D., or equivalent doctoral degree in Biomedical Engineering, or a related field of engineering, as outlined in paragraph 3.b.(1).OR Bachelor's degree, plus three full years of progressively higher level graduate education in a related field of study, as outlined in paragraph 3.b.(1).

Knowledge, Skills, and Abilities (KSAs).

In addition to the experience for the GS-11, the following KSAs are required: Ability to implement and/or sustain an equipment management or biomedical research program that meets The Joint Commission (TJC), National Fire Protection Association (NFPA), or other applicable regulatory requirements.

Ability to develop material for a continuing education program for clinical or research staff, that address the principles and application of medical technology, and/or biomedical theory used in healthcare.

Ability to advise staff on emerging medical technology, or research procedures], while keeping abreast of changes in such technology, and utilizing the information to solve biomedical engineering problems.

Knowledge of basic project management principles, as applied to the healthcare setting and medical equipment, and information system implementation. Assignment.

At the developmental level, employees function on a semi- independent basis with limited oversight by senior biomedical engineers.

They participate in medical device hazard investigations, to assure compliance with patient safety goals, the Safe Medical Devices Act (SMDA), TJC requirements, and assist in the development of an equipment management program at the medical center.

Employees may lead medical technology deployments, directly support medical equipment, or participate in research projects. Biomedical Engineer, GS-12 (Full Performance Level) Experience.

Completion of at least [one] year of specialized experience equivalent to the next lower level (Example of GS-11 Experience: employees function on a semi- independent basis with limited oversight by senior biomedical engineers.

They participate in medical device hazard investigations, to assure compliance with patient safety goals, the Safe Medical Devices Act (SMDA), TJC requirements, and assist in the development of an equipment management program at the medical center.

Employees may lead medical technology deployments, directly support medical equipment, or participate in research projects.); OR completion of a post-doctoral research fellowship in the field of biomedical engineering, and must fully meet the KSAs at that level.

Major Duties:

Duties include but are not limited to: Uses basic engineering principles to provide limited professional, healthcare technology management services for the medical center.

Projects or assignments typically include facility-based work, and may include assisting with VISN or National HTM projects.

Continually learns new technology, identifies trends, and utilizes the information to solve biomedical engineering problems. Assists in lifecycle management of medical equipment and clinical systems.

Participates in technology assessment of medical equipment systems by working collaboratively with clinical staff to evaluate market offerings, determine medical center requirements, design system configurations, and develop technical specifications.

Works collaboratively with Contracting staff to procure medical equipment and maintenance that best meets clinical needs, to include evaluating technical proposals and contributing to price negotiations.

Assists and/or coordinates implementation of medical technology including assessing installation and site preparation requirements, managing project timelines, monitoring installation, and facilitating training for equipment operators and maintainers.

Participates on medical center construction projects, space functional changes, and associated planning with respect to HTM-supported technologies, including site preparation for medical equipment, non- recurring maintenance projects, and minor construction projects.

Assists with remediation and documentation of hazard alerts and recall notifications concerning medical equipment impacting the facility.

Supports a medical equipment management program that allows the DC VAMC to meet the requirements set by accrediting organizations such as The Joint Commission (T JC).

Assists in troubleshooting medical equipment and clinical systems using a variety of technical data and corrective action practices.

Utilizes basic networking concepts, such as computer and server hardware and software used in conjunction with medical devices and clinical systems.

Demonstrates the ability to analyze organizational and operational problems involving medical equipment, and recommend timely and economical solutions accordingly.

Assists with analyzing and recommending optimal maintenance strategies for medical equipment and systems, to include cost-benefit evaluation of out-sourcing versus in-house support.

Assists with preparing quality assurance monitoring reports and standard operational procedures. Assists in the development/review of medical center policy memoranda.

Documents all work in the Computerized Maintenance Management System (CMMS).

Provides customer support to staff, evaluates issues and needs, responds with solutions, and keeps customers abreast of status.

Complies with all applicable standards, policies, procedures, and regulatory requirements. Work Schedule: Monday- Friday 8am-4:30pm EST Telework: Not Authorized Virtual: This is not a virtual position.

Functional Statement #:688-25119-F, 688-25120-F, 688-25121-F, 688-25122-F Relocation/Recruitment Incentives: Not Authorized Permanent Change of Station (PCS): Not Authorized PCS Appraised Value Offer (AVO): Not Authorized